美***Glas-Col加熱帶Heating Tapes and Cords
HEATING TAPE
In both permanent and temporary applications, this tape heats odd lengths of glass tubes and metal pipes. Ribbon-type heating elements running lengthwise in the tape are encased in durable glass braid and are impregnated and covered with
tough silicone rubber, which insulates stranded terminal leads at one end and waterproofs fittings at both ends. Glas-Col heating tapes:
● are ideal for use in high moisture areas
● are resistant to most laboratory environmental conditions
● easily pass a 1,000V test for electrical insulation
Specifications
Electrical: Attached cord with 2-blade plug. Single end termination.
Temperature Limit: 480°F.
Note: Power ratings in the tables are for tapes not covered by insulation when installed. If covered, temperature should be monitored and controlled to avoid exceeding 480°F limit. Short, narrow tapes rated at less than 115 volts must be operated at reduced voltages, which are easily attained with a power control (see pages29-34). Consult Glas-Col for information on special lengths of heating tapes.
HEATING CORDS
The high-temperature, wrap-around Cal-Cord wraps and heats tubes as small as 1/2"diameter. It should be used only in dry or low-moisture areas, on non-metallic surfaces,because of the insulation’s high-temperature capabilities. Installation and removal are quick and easy with single end termination.
Specifications
Electrical: Separable 4-ft., 2-wire cord and locking connector.
Size: 1/4" diameter, varying lengths.
Temperature Limit: See chart.
滬公網(wǎng)安備31011502016460號
